When Your Handheld Needs a New Battery
Nintendo 3DS, New 3DS, New 2DS, and original 2DS systems all share the same battery model: the CTR-003. Over time, even a well-cared-for handheld battery loses its ability to hold a charge. If your console won't power on, shuts down unexpectedly, or only lasts a short time unplugged, a replacement battery is often the fix.
This guide walks you through the replacement process using a compatible third-party battery. The steps are the same for any CTR-003 compatible device, including the Wii U GamePad.
What You Need for the Replacement
- Nintendo 2DS/ 3DS Battery 3rd Party: Rechargeable Lithium-ion Battery Model CTR-003 Compatible with Nintendo 3DS, New 3DS, New 2DS, 2DS and Wii U - Battery Pack, 1300mAh This third-party battery is a direct replacement for the original. It uses the same CTR-003 model number and 1300mAh capacity, so it fits securely and delivers the expected runtime.

Nintendo 2DS/ 3DS Battery 3rd Party
Step-by-Step Battery Replacement
Before you start, power off the console completely and remove any game cartridge or SD card. Work on a clean, flat surface with good lighting.
- 1. Locate the battery cover: On the back of the Nintendo 2DS or 3DS, find the rectangular battery cover. It is held in place by a small screw (Phillips #00 or #0).
- 2. Remove the screw and cover: Unscrew the battery cover screw and set it aside in a safe place. Gently lift the cover off to expose the old battery.
- 3. Disconnect the old battery: The battery is connected to the motherboard by a small ribbon cable and a connector. Use a plastic spudger or your fingernail to carefully lift the connector straight up from its socket. Do not pull on the wires.
- 4. Remove the old battery: The battery may be held in place by a small piece of adhesive tape. Gently lift the battery out of its compartment. Do not puncture or bend the old battery.
- 5. Insert the new battery: Place the new CTR-003 battery into the compartment, aligning the connector with the socket. Press the connector firmly into place until it clicks. Ensure the ribbon cable lies flat and is not pinched.
- 6. Replace the cover and screw: Put the battery cover back on and tighten the screw snugly. Do not overtighten. Power on the console to test the new battery.
What to Expect From a Third-Party Battery
The replacement battery listed here is a fully tested and functional third-party part in very good condition. It matches the original CTR-003 specifications and 1300mAh capacity. While third-party batteries can vary in long-term performance, this unit has been verified to work correctly before sale. Always follow proper charging practices and avoid exposing the battery to extreme temperatures.


